Transport and packaging
Item no. 10203039, Revision 06
5 ( 36 )
2
Transport and packaging
Avoid strong vibrations or impacts during transportation, as these could dam-
age the ball bearings of the HF spindle.
Ü
Any damage reduces the accuracy of the HF spindle.
Ü
Any damage restricts the functionality of the HF spindle.
Ü
Any damage shortens the service life of the HF spindle.
2.1
Scope of supply of HF spindle
The following parts are supplied with the HF spindle:
q
High Frequency Spindle
q
Clamping nut
q
Jaw wrench
q
Hook wrench
q
Transport packaging
Ü
Check the high frequency spindle for completeness upon delivery.
2.1.1
Optional accessories
Available on request:
q
Spindle holder
q
Frequency converter
q
Chiller
q
Collet
q
Felt cleaning taper
q
Collet grease
q
Further accessories on request.
Only approved accessories have been tested for operational safety and func-
tionality.
Ü
Do not use any other accessories – this may invalidate any warranty claims
and compensation claims for damages.
Ü
If the spindle holder is to be produced in-house, it is essential to contact
Alfred Jäger GmbH
before starting production to request the tolerances
and production plan for the spindle holder.
2.1.2
Documentation supplied
The documents listed below are supplied with the HF spindle:
q
Manual
q
The declaration of incorporation is part of the manual.
q
Inspection protocol
Ü
Check that the documentation supplied is complete when the spindle is
delivered. If necessary, request a new copy.
