Jäger Z33-M080.03 K2S15 Скачать руководство пользователя

Страница: 4 / 40

Preliminary information

Item no. 15201035, Revision 01

4 ( 40 )

Preliminary information

The high frequency spindle (HF spindle) is a high quality precision tool for
high speed machining.

1.1

Purpose of the manual

The manual is an important component of the HF spindle.

Store the manual carefully.

Make the manual available to all persons who work with the HF spindle.

Read the documentation supplied in full.

Before carrying out any work, read the corresponding section of the man-
ual carefully again.

1.2

Explanation of symbols used

To enable quick classification of information, this manual uses visual aids in
the form of symbols and text markings.

Notes are marked with a signal word and a colored box:

DANGER

Dangerous situation!

Results in serious injury or death.

Measure to avert the danger.

WARNING

Dangerous situation!

May result in serious injury or death.

Measure to avert the danger.

CAUTION

Dangerous situation!

May result in minor to moderate injury.

Measure to avert the danger.

Note

May result in material damage. This warning symbol is not a warning for per-
sonal injury.

Tip

Tips indicate useful information for users.

Содержание Z33-M080.03 K2S15









































Результаты поиска

Содержание Z33-M080.03 K2S15

Отзывы:

Похожие инструкции для Z33-M080.03 K2S15

Бренды по названию

Популярные бренды

Jäger Z33-M080.03 K2S15, Руководство пользователя

Результаты поиска

Содержание Z33-M080.03 K2S15

Отзывы:

Похожие инструкции для Z33-M080.03 K2S15

Бренды по названию

Популярные бренды