Safety instructions
Item no. 13502000, Revision 04
7 ( 36 )
4
Safety instructions
The high frequency spindle is a state of the art product and is safe to operate.
However, the HF spindle may pose a risk in the following cases:
q
If it is installed by untrained personnel.
q
If it is used incorrectly.
q
If it is not used in accordance with its intended use.
The high frequency spindle may only be installed, commissioned, and main-
tained by specialist personnel.
Definition:
Specialist personnel are persons who are familiar with the assem-
bly, installation, commissioning, and operation of the product and have the
relevant qualifications for their area of activity. The operator must closely con-
trol the responsibility, training, and monitoring of these personnel.
DANGER: Due to explosion.
HF spindles are not approved for use in areas at risk of explosion. Use in such
areas may result in explosions.
u
Do not use the HF spindle in potentially explosive atmospheres.
DANGER: Due to flying parts.
The HF spindle operates at high speeds and may therefore be flung away by
these.
u
Operate the HF spindle only if it is installed in the machine or system in a
fixed manner.
DANGER: Due to flying connection cables.
If the HF spindle is inserted into the main spindle of the machine tool:
u
The main spindle of the machine tool must be at a standstill.
Note: Adhere to the limit values.
u
Observe the limit values specified in the technical data.
Note: Take account of the machine.
u
Observe the manual of the machine in which the HF spindle is installed.
u
Observe all safety instructions specified by the machine manufacturer.
u
Ensure that the machine does not cause any hazards (e.g. uncontrolled
movements). Do not install the HF spindle in the machine until this has
been done.
