Jäger F80-M530.05 K02S5R, Руководство пользователя

Страница: 33 / 44

Tool change
Item no. 10205019, Revision 05 33 ( 44 )
10 Tool change
CAUTION: Danger of being drawn in by rotating shaft.
If the shaft is still rotating, fingers and hands may be drawn in and crushed.
u
Only change the tool if the shaft is at a standstill.
Example of design: Inserting the
shank
Note: Ensure functionality.
u Never operate the HF spindle without a clamped tool shank.
If no tool shank is clamped:
q The clamping system is damaged by the centrifugal forces.
q
The clamping system is shifted.
q The balance of the HF spindle is affected.
q The bearing is damaged.
10.1 Clockwise and counter-clockwise
Sample illustration:
Direction of rotation indication
The HF spindle clamping system is designed for clockwise and counter-clock-
wise rotation.
Ü Only use tools with the correct direction of rotation for the HF spindle.
Ü Only use tool mounts with the correct HF spindle direction of rotation.
Ü
Set the HF spindle direction of rotation on the FC to match the direction of
rotation of the tool / tool mount used.
10.2 Manual hollow shank taper
1 Clamping segment
2 Access hole
3 Locking ring
4 Threaded spindle
5
Marking "X"
6 Snap ring
7
Ejector with withdrawal thread
8 Basic body
9
Driver
10 Cam
11
Shaft of HF spindle
12 Mounting spindle