Jäger F62-M450.01 S21, Руководство пользователя

Страница: 31 / 36

Dismantling
Item no. 10204237, Revision 00 31 ( 36 )
13 Dismantling
Proceed as follows to remove the HF spindle:
Ü
Completely disconnect the power supply.
Ü Completely disconnect the media supply (air and liquid).
Ü Make sure that the shaft of the HF spindle has come to an absolute stand-
still.
Ü
Remove all connections from the HF spindle.
Ü Empty the cooling duct of the HF spindle.
Ü Remove the HF spindle from the machine.
13.1 Disposal and environmental protection
More than 90% of the materials used in the HF spindle can be recycled (alu-
minum, stainless steel, steel, copper, etc.)
The HF spindle may not be disposed of with normal domestic waste.
Ü
Remove all non-recyclable materials.
Ü Dispose of the HF spindle as scrap at an approved recycling facility.
Ü Follow all rules of the responsible administrative bodies.
Ü
Do not discharge coolants into wastewater.
Ü Dispose of cooling media in accordance with local regulations.
If the HF spindle cannot be dismantled, send the HF spindle to Nakanishi
Jaeger GmbH . Nakanishi Jaeger GmbH shall not assume the costs incurred
for shipment and the fees for the recycling facilities.