Jaga HEDW.094040, Инструкция по установке и эксплуатации

Страница: 84 / 96

13.2.8. Restoring factory settings
In order to a coming back to factory settings, proceed from the setting of the temperature unit,
press
.
1. ‘Rest’ appears on the display, press .
2. ‘NO’ appears. Press or to select ‘YES’.
- YES: factory settings reset
- NO: factory settings not reset
3. Press for 5 seconds. The device returns to its initial configuration and goes back automati-
cally to the home display of the user settings.
Press to exit the User settings.
14. INSTALLER SETTINGS
14.1. ACCESS TO THE INSTALLER SETTINGS
Press for 5 seconds to enter into the programming mode. The cursor moves to ‘setting day and
time’. Press twice to move to ‘User settings’. Press for 10 seconds to move to ‘Installer set-
tings’. Press .
1. Open window detection
2. PIN code lock
3. Restoring factory settings
5 sec
Setting day
and time
Program
settings
User
settings
Installer
settings
5 sec 10 sec
14.2. SETTING SEQUENCE
All settings are consecutive. To exit the user settings, press 3 times.
1 2 3
14.2.1. Open window detection
The automatic mode enabled is the default setting.
1. Press or
to select ‘ON’ or ‘OFF’.
- ON: automatic mode enabled
- OFF: automatic mode disabled
2. To save and move automatically to the next setting, press .
1 1
84