EN
25
JAGA N.V. | CLIMA CANAL - JDPC | MANUEL | 11.02.2021 | V.01
3. SETTINGS
3.1. ADJUSTING THE WATER TEMPERATURE
3.1.1. Adjusting the maximum water temperature for cooling
By reducing the water temperature setting, the unit will start later. If the water temperature is set
higher, the unit will start sooner .
1. Start setup mode: press and hold the [
-
] button until
the
blue LED
flashes 5x and release .
2.
3. Exit setup mode: hold the [
-
] button until
the
blue LED
flashes 5x and release .
3.1.2. Adjusting the minimum water temperature for heating
By increasing the water temperature setting, the unit will start later. If the water temperature is set
lower, the unit will start sooner .
In combination with a heat pump, it may be necessary to reduce the water temperature .
1. Exit setup mode: Press and hold the [
+
] button until
the red LED
flashes 5x and release .
2.
12 ̊C
14 ̊C
16 ̊C
18 ̊C
20 ̊C
22 ̊C
24 ̊C
26 ̊C
The blue LED
flashes quickly when the minimum
temperature is reached.
The red LED
flashes quickly when the maximum
temperature is reached.
Automatic control:
The green LED
lights up when the water temperature (supply water) is lower than the set tempe-
rature
Briefly press the [-] or [+] button to adjust the set tempe-
rature .
Briefly press the [-] or [+] button to adjust the set tempe-
rature .
24 ̊C
26 ̊C
28 ̊C
30 ̊C
32 ̊C
34 ̊C
36 ̊C
38 ̊C
3. Exit setup mode: press and hold the [
+
] button until
the red LED
flashes 5x and release .
After 30 seconds, the new settings are automatically saved and the device returns to the
selected mode.
1
-
1
-
1
-
1
-
The blue LED
flashes quickly when the minimum
temperature is reached.
The red LED
flashes quickly when the maximum
temperature is reached.
Automatic control:
The green LED
lights up when the water temperature (supply water) is lower than the set tempe-
rature .
