JWI-700D/700S 10
6.
Hold function
HoLd
– 0
：
No hold function
HoLd
– 1
：
Hold the peak weighing value. Press any key to release
HoLd
– 2
：
Hold the weighing value after stable. Press any key to release
HoLd
– 3
：
Hold the weighing value after stable. Move away the articles to release
HoLd
– 4
：
Hold the weighing value while pressing down key
-/
H
OLD/
LO.
Press any key to
release
Note:
the weight should be over 20d
7.
Check weighing memory
on
：
Check weighing function when restart the indicator is the same with that before powering
off.
off
：
Check weighing function would not auto-on when restart the indicator
8.
Stable Check Weighing
On:
Check weighing after stable indicator appears and the weights is between the upper and
lower limit
Off:
Check weighing when the weights is between the upper and lower limit
9.
Check Weighing buzzer beep
Hi
：
There will be a warning sound when the weight of articles exceeds the upper limit, and
the weight is equal or more than 20d
LO
: There will be a warning sound when the weight of articles exceeds the lower limit, and
the weight is equal or more than 20 d
ok
：
There will be a warning sound when the weight of articles is between the upper and lower
limit (including the upper and lower limits), and the weight is equal or more than 20d
out
：
There will be a warning sound when the weight of articles is beyond the upper & lower
limit, and the weight is equal or more than 20d
no.beep
：
Three-stage check weighing(Buzzer in mute)
10.
Filtering setting
Set the filtering level in which the stable indication turns on. The higher the setting, the slower
stabilization time
Options:
1
，
2
，
3
，
4
11.
Tare/Zero condition
stable
：
Only after the stable indication appears, Tare/Zero function acts after pressing
down key
TARE
or
ZERO
