14
Symbol ― ‖ pointing at
“M+”.
The display reverts to normal
weighing mode in a second .Remove the first piece
3) Put the second piece of load on, and then press key
M+/SAVE
to add the second
accumulation event into memory. Repeat step 2-3 till accumulation actions are finished.
Note: Maximum is 99 pieces. It is able to calculate the second deal when returning to zero
after the first one under the condition of more than (or equal to) 20d with stability.
Minus weight
and gross weight can
’t be accumulated. After resetting the sample value or unit weight, the
quantity accumulated will be adjusted automatically according to the new setting value.
Accumulation display
1) Press key
/MR
to displays the total accumulation data (weight,
quantity
and number of
weighments)
2) Press key
/MR
or
TARE/
to check the total events and
the first 10 accumulation events in detail.
3)
When connecting PC, printer DMP or CK, press
PRINT/LO
to output the events
Note
：①
XX=total accumulation events
；
XX=the single accumulation
Accumulation clear
To clear the total accumulation data or the first 10 accumulation events, press key
/MR
or
TARE/
to shift the events and then press key
M-/HI
to clear.
Symbol ― ‖ disappears
when the total accumulation data is deleted.
7-6 Initialization of the Scale to Printer (Optional)
Step 1
Press
G N/SET
key while powering on or long press
G N/SET
key in the
weighing mode to enter parameter setting. Press key
/MR
or
TARE/
to circle
the parameters and select
SET08
。
Step 2
Press
G N/SET
to enter the external equipment choosing. Press key
/MR
or
TARE/
to select the type of printers. Press
G N/SET
to start initialization.
The window of unit weight displays the type of printer. And the window of total
amount displays UNSU or init
？。
