V03
JCAII
19
window while the arrow is pointing at
HI
in the Total Count window. (If the value in Weight
window is not blinking, press )
Eg. 2kg.
2. Use numeric key to input the high limit of weight you want.
3. Press to save and return.
8-8-2Set the low limit of weight
1. Press under normal weighing mode. The display of the weight is blinking in the Weight
window while the arrow is pointing at
LO
in the Total Count window. (If the value in Weight
window is not blinking, press )
E.g. 2kg.
2. Use numeric key to input the low limit of weight you want.
3. Press to save and return.
8-8-3Enable / Disable the weight check function
1. Under normal weighing mode, press or . The display in the Weight window is
blinking. (If the value in Weight window is not blinking, press )
2. If you want to enable the function, press
If you want to disable the function, press
Note:
When the
HI & LO
checking function is enabled, there will be an arrow pointing between
PERSET TARE
and
NET.
8-9 Unit weight ID
Note:
possible save up to 50 ID
8-9-1Saving ID method 1
For example, save 1.23g to ID 12
1. Press under normal weighing mode and the Unit Weight is blinking.
