V03
JCAII
16
Note: (1)If you wish the SH-24 should be able to print date & time, the scale needs an optional
module RS-232+RTC.
(2)If you have a printer that you think is compatible with the SH-24, then just connects the
scale and the printer and remember to choose print model
(even it is not the
SH-24). Please choose own of the print formats from Prt-00 to Prt-15 and if the print appears
correct, means that the printer is compatible with the SH-24.
8-5-2 Set Print mode
1.Press key
with no load on the pan.
2.Press key . The display shown is
3. Press key or to choose the print mode
= Manual
= Print after
appears
= Print when quantity is ok (with check function)
= Print when weight is ok (with check function)
= Print continuously
=No action
4. Press key
to complete and return to weighing mode.
8-5-3
Select the Printer Model
1. Under normal weighing mode keep pressing
for about three seconds to enter parameter
setting.
2. Press
or
to switch between the parameters and select P-05
3. Press
or
to choose printer model
= BP printer output (Automatic-sticking), paper size: 5cm*3cm
= ZEBRA printer output (Automatic-sticking), paper size: 5cm*3cm
= SH-24 printer output (dot-matrix)
= EZ printer output (Automatic-sticking), paper size: 5cm*3cm
=
Normal compatible printer
= LED display
= Adhesive sticker label
