V03
JCAII
15
2. Press to save and return.
Note
: When the serial number reaches the max, the Unit Weight display will flash
and beep
for 3 seconds and then return to normal weighing mode.
And because it has reached the max serial number, it will reset to 1 when the serial number do
increase 1.
8-6-3 Change the Current Serial Number
For example: if you want to change the serial number to 9, do as the following.
1.Press and the Unit Weight display is blinking.
2. Press to save and return.
Note:
the serial number is starting from 9.
8-7Quantity checking
8-7-1 Set the high limit of quantity
1.Press under normal weighing mode. The last high limit value of quantity is blinking in the
Total Count window while the arrow is pointing at
HI
. (If not, press )
Eg. 111pieces.
2.Use numeric key to input the high limit of quantity you want.
3.Press to save and return.
8-7-2 Set the low limit of quantity
1.Press under normal weighing mode. The last low limit value of quantity is blinking in the
Total Count window while the arrow is pointing at
LO
. (If not, press )
Eg. 111pieces.
2.Use numeric key to input the low limit of quantity you want.
3.Press to save and return.
8-7-3 Enable / Disable the quantity limit function
1.Under normal weighing mode, press or . The display in the Total Count window is
blinking. (If not press )
