Carefully close the cover. Turn the power on.
Jadens will start automatic label identification,
the label will go back and forth for several times
and then be positioned at the tear-off point. Jadens
is ready to print.
Tips:
Anytime you change your label, run the automatic label identification. Press and hold
the feed button until you hear one beep.
Win 7 or later
Chrome book, Linux, Win ARM
Installation guide video in U-disk for better reference.
Recommend to close security software before installation in case of
preventing installation, and you can open it again after installation.
Note:
√
×
a. Connect power and computer(Please skip this step if you have finished it before.)
Copy the driver in the U-disk(Label Printer Driver Setup. exe) to your
PC desk, open and install it as below:
b. Install the driver and printer for Windows
See FAQ at support.jadens.com
6.Installation for Windows
