C I N E B R A T E User Manual
11
C
HARGING THE
B
ATTERY
Note: Fully charge the battery before the initial use.
1.
The CINEBRATE battery will charge whenever the AC Adapter is connected to the instrument.
2.
If you purchased the optional External Charger, the time for a full charge is 10 - 12. To use the charger:
a.
Make sure the charger power supply is properly connected to the charger and an appropriate
AC power source. The AC input range is 100 to 240 VAC, 50
–
60 Hz.
b.
The battery and charger are keyed. To insert the battery in the charger, make sure the keys are
aligned and push the battery as far forward as possible.
c.
There are three status LED’
s on the charger, MED, HI and MAX. Depending on the charge state
of the battery, the LED’s will blink in succession. For example, for a fully discharged battery the
MED, HI then the MAX lights will blink one after another. For a partially charged battery, the
MED light will be solid, and the HI and MAX lights will blink etc. Once the battery is fully
charged, all three LED’s will remain steadily lit.
d.
Remove the battery when fully charged.
S
TANDARD
O
BJECTIVE
L
ENS
The CINEBRATE standard objective lens is a 75 millimeter fixed focus lens with a distance range from 3 meters to
30 meters.
I
NSTRUMENT
S
TORAGE
When the CINEBRATE will be idle for an extended period of time, remove the battery pack from the instrument.
Store the battery pack in a cool dry place. The instrument should be stored in a cool, dry location.
