Jacuzzi Quantum Plus 770000, Руководство пользователя

Страница: 6 / 24

Important: Read complete instructions before beginning installation.
Positioning Your Spa
Because your Quantum Plus spa is a portable, you can locate it just about anywhere you wish—on a deck, patio, or even
indoors. Just be sure to position it above ground in an area with good drainage and on a level, continuous surface which
can support the weight of the spa when filled with water and people; this weight is approximately 5252 lbs. (92 lbs. per sq
ft). You must also provide access to the spa’s equipment for service and general maintenance.
4
Electrical Requirements
Your Quantum Plus, as it comes from the factory,
requires a 230 VAC 50 AMP 4-wire grounded type electri-
cal service and must be in a separate circuit having no
other appliance connected in that circuit. If you do not have
this kind of circuit, a qualified electrician should be called
in to install the necessary wiring. Inadequately sized wiring
or locating the spa too far from the main service panel may
cause a voltage drop which might cause the unit to
INSTALLATION
50"
18"
SERVICE ACCESS
malfunction and bring about permanent damage to the
spa’s electrical system. The circuit must also have a ground
wire in order to take advantage of the designed-in safety
features of the spa. Bond according to procedure described
on the next page. Caution: Without proper grounding and
bonding, a system malfunction may cause fatal shock.