To ensure optimum performance, clean and reuse both cartridges once a
month.
ALWAYS TURN POWER TO SPA OFF BEFORE CLEANING THE
FILTER CARTRIDGES!
Refer to the filter cleaning/replacement procedure
below:
Page 28
E
Rinse debris from filter pleats on
each cartridge using a garden hose
and high-pressure nozzle. Start at
top and work downward to handle.
Repeat until all pleats are clean.
B
Lift upward on filter cover handles to
unsnap and remove it from mating
retainer clips.
D
Remove both cartridges from
skimmer well.
F
Place each cartridge back into
skimmer well
*
, then rotate each
cartridge handle clockwise to
thread back into wall fitting.
DO
NOT OVERTIGHTEN!
C
Rotate each filter cartridge handle
counterclockwise to unthread from
mating wall fitting.
G
1. Install filter cover by sliding it
down into position over mating
retainer clips.
2. Turn power to spa back on.
A
TURN POWER TO SPA OFF!
Cartridge 1
Cartridge 2
top
top
handle
Skimmer Well
filter cover
handles
*
Note: to maximize filter life, switch filter cartridge positions at each cleaning. The circulation pump's filter wall
fitting is easily identified by it's mesh grill.
(Inside Spa View)
(Inside Spa View)
(Inside Spa View)
(Inside Spa View)