Jacuzzi Profile, Руководство по установке

Страница: 29 / 96

29
Limitation of electricity consumption
If you do not have enough electricity and decide to turn the con-
sumption limiter on, you must configure the system software as in-
dicated (refer to the wiring diagrams to identify the type of electrical
box on board the hot tub).
X
Make sure the spa is disconnected from the power supply line.
X Remove the cover of the electrical box and set the switch
("dip-switch") n ° 1 to the OFF position.
1 2 3 4 5 6 7 8
ON
Q
PROFILE "TOP"
X In the OFF position, the electric heater switches off when a
whirlpool pump is activated.
Q PROFILE "BASE" (DSP)
X
In the OFF position, the electric heater switches off when the
whirlpool pump is activated in high speed.
NOTES
- When dipswitch 1 is set to ON, the maximum electrical consump-
tion is selected.
Check of operation
First start-up
X Check that the filter cartridge is present in its container and
that the various components are properly installed (see the chap-
ter on maintenance of the filter cartridge).
A
A
X Check that the drain valve (V) on the base (and the ball valve
V1, if installed ) are closed .
V1
V
X
Check that all the hydromassage intakes are open.