Jacuzzi Platinum 2001, Руководство пользователя

Страница: 25 / 52

Operation
Page 21
Unlocking the Panel
To unlock the panel, these buttons must be pressed in the correct sequence and within 2
seconds. When the last button is touched, the lock symbol will disappear. All buttons are now
active.
Press , then press , then press .
Display Messages
These are some of the messages you may see on the center display.
Message
Pd
OH
FLO
FLO
COOL
Meaning
Battery Backup: Power has been cut OFF to the hot tub. It is using its 15 minute
rechargable battery backup to preserve its settings. The control panel will be
disabled until power returns to the unit.
Overheat Protection: The hot tub is deactivated. If a malfunction occurs and the
hot tub water reaches 112 F, the system will completely shut down.
DANGER: DO NOT ENTER THE WATER. Contact your dealer or service
organization.
Flow Switch (Constantly displayed): A flow switch has malfunctioned. Contact your
dealer or service organization.
Flow Switch (Flashing): 1) The filter(s) may be plugged. Remove the filter(s) and
clean. 2) The amount of water may be inadequate. Be sure the hot tub is properly
filled. 3) A flow switch has malfunctioned. The hot tub will operate, but the heater
will not activate. Contact your dealer or service organization.
Temperature Set Back: If the hot tub water is more than 20 F cooler than the
temperature setpoint, the filter pump and heater will automatically activate. This is
a normal hot tub function;
no corrective action is necessary.