ENGLISH
Note: This is a professional grade product. A knowledge of construction techniques, plumbing and electri-
cal installation according to codes are required for proper installation and user satisfaction. We recommend
that a licensed contractor perform the installation of all Jacuzzi Whirlpool Bath
©
products. Our warranty
does not cover improper installation related problems.
PRECAUTIONS
•••••
Do not operate the hydromassage system unless the bath is filled with water to at least 1" above the highest jet.
•••••
Do not immerse the control panel by overfilling the bath.
•••••
Do not use oil-based bath additives in your hydromassage bath.
•••••
When cleaning your bath, do not use abrasive substances which will damage the bath's surface.
•••••
To prevent discoloration of the acrylic finish, do not fill the bath with water in excess of 140°F (60°C).
•••••
The whirlpool system should be purged at least twice a month. For your convenience, we have developed a plumbing
system cleaner (Systems Clean™) specifically for whirlpool baths. For availability call 1-800-288-4002.
•••••
Use this unit only for its intended purpose as described in this manual. Do not use attachments not recommended by the
manufacturer.
•••••
This unit should be electrically grounded and installed by a licensed contractor, electrician, and plumber.
•••••
For built-in and drop-in units, install to permit access for servicing.
PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
USE INSTALLATION INSTRUCTIONS SUPPLIED WITH PRODUCT.
The Company has obtained applicable code (standards) listings generally available on a national basis for products of this type.
It is the responsibility of the installer/owner to determine specific local code compliance prior to installation of the product. The
Company makes no representation or warranty regarding, and will not be responsible for any code compliance.