J-Allure
16
Side Walls Installation
Lift one of the side walls through the open doors. Reach under the bath rim and pull up the speaker wires. Hook up
these wires observing the polarity as directed from the CD player manual. Then insert the 3 bolts into the slotted holes
in the center panel frame. Place the opposite side of the side wall against the wall. Make sure the side wall matches
the fixed panel. Set the side wall down onto the side of the bath so that the lower frame of the wall is inserted between
the bath and the wall. Secure the side wall to the center panel frame with lock washers and M6 nuts. With the wall
flush against the fixed panel, drill three 7/64" holes using holes in the wall frame as guides. (Be careful not to scratch
the finish.) Secure the wall using 3.5x9.5mm self-threading screws. Repeat the same procedure for the other side
wall. Close door and secure.
SIDE
WALL
WALL
EXTRUSION
SIDE WALL
BATH RIM
FRAME
FIXED
PANEL
FRAME
REAR OF
SPEAKER
OBSERVE POLARITY
(SEE BLAUPUNKT MANUAL)
-
+
CENTER
PANEL
FRAME
SIDE
WALL
