Page 2
www.jacuzzi.com
3. Install Overflow Assembly (H) using
supplied Round Gasket (E), Flange Ring
(F) and Brass Nut (G). Finger tighten brass
nut.
Note: Brass Nut (G) to be tightened further
upon completion of step 4.
4. Verify Poly-Vinyl washers (I) are installed
under Drain Nuts (beveled side inward).
Tighten Drain Nuts to secure Drain Tee.
Finally, tighten Brass Overflow Nut (G) with
an adjustable wrench to secure Overflow.
Do Not Overtighten!
5. Install Drain Knob over Overflow Shaft (set
screw against flat surface). Then adjust
Knob for a 1/16”-1/8” wall gap as
illustrated. Finally, tighten set screw to
secure.
CAUTION!
Drain Knob wall gap is
mandatory to allow water to escape,
preventing overflows.
H
G
E
F
Round Flange Ring
Brass Nut
Round Gasket
Tub Wall
I
G
Overflow
Assembly
Verify Poly-Vinyl
Washers are installed
under Drain Nuts
Drain
Nuts
Drain Tee
Drain Shoe
Tub Wall
Mandatory wall
gap 1/16" - 1/8"
Drain Knob
3/32" Allen
Wrench
English
