www.jacuzzi.com
Page 1
HC08000A
06/2011
English
Overflow Drain Kit
Installation Instructions
This drain kit has a 26” exposed cable and is designed to fit baths 17” to 22” in height.
Required Tools
Level
Hacksaw
Yardstick or Tape Measure
Standard Screwdriver
Plumbers Putty
3/32" Allen Wrench
Sandpaper
Adjustable Wrench
Installation Instructions
1. Dry mount the Overflow Assembly and
Drain Shoe onto tub as shown. Refer to
bath specification sheet for recommended
dimensions.
Note: DO NOT detach Drain Shoe cable
for any reason. Cut Overflow Assembly
Tube and Drain Shoe Tube ends as
necessary to achieve fit. Remove rough
edges with sandpaper prior to assembly.
2. Install Drain Shoe (D) using supplied brass
Drain Bolt (A), Strainer (B) and Gasket (C)
as illustrated. Tighten Drain Bolt (A) to
secure. Do not overtighten or Drain Shoe
assembly may be damaged!
Note: The top tub lip MUST be level. Verify
top and bottom tub floor sealing surface is
clean, flat and smooth prior to assembly.
D
A
B
C
Overflow and Drain
Shoe Tube must extend
1" - 1.5" into drain tee
ends.
Overflow
Assembly.
Drain
Tee
Tub Wall
Drain Shoe
Brass Drain Bolt
Verify strainer is
level and flush with
the tub surface.
Tub Floor
Gasket
Plumbers Putty required
