3
ASSEMBLY INSTRUCTIONS
CARE AND MAINTENANCE
•
and void your warranty.
The manufacturer warrants this faucet to be free from defects in workmanship and material present at time of shipment
from the factory for a 90 days from the date of purchase. This warranty applies only to the original purchaser. The
manufacturer agrees to correct such defects at no charge or, at our option, replace the faucet with a comparable or
superior model. To obtain warranty service, call our customer service department at 1-800-288-4002 for return
authorization and shipping instructions. You may be required to present a copy of your sales receipt as proof of purchase.
All cost of removal and reinstallation are the expressed responsibility of the purchaser. Any damage to the faucet by ac-
, are the purchaser’s
responsibility. The manufacturer assumes no responsibility whatsoever for faucet installation during the warranty period.
There is no further expressed warranty. The manufacturer disclaims any and all implied warranties. The manufacturer shall
not be liable for incidental, consequential or special damages arising at or in connection with product use or performance
rights which vary from state to state. This warranty supersedes all prior warranties.
WARRANTY
Connect the flexible supply lines (1) to the water
supplies (2).
7
1
2
Flushing and checking for leaks
Important: After installation is completed, turn on the
hot and cold water supplies. Check for leaks. Flush
the water lines for one minute. Press the pin (1) to the
bottom position, and flush water lines for one minute.
This flushes away any debris that could cause damage
to internal parts. Check for leaks. After flushing, turn
the handles all the way off to shut off the water. The
pin (1) should now be in its normal position. Re-tighten
any connections if necessary, but do not overtighten.
8
1
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
There is a leak from under the handle
or there is a leak from aerator when
the faucet is off.
The cartridge is damaged.
Remove the handle and replace the
cartridge.
Hand shower leaks or has a low flow
pattern.
Hand shower is dirty or damaged.
Remove the hand shower and check
for any debris clogged at the shower
connection, check the hand shower’s
spray nozzle for any build up or debris.
