![Jacobsen GreensAire 24 58234 Скачать руководство пользователя страница 22](http://html1.mh-extra.com/html/jacobsen/greensaire-24-58234/greensaire-24-58234_technical-manual_3246706022.webp)
7 MAINTENANCE
22
7
MAINTENANCE
7.1 GENERAL ________________________________________________________________
1.
Adjustment and maintenance should always be
performed by a qualified technician. If proper
adjustments cannot be made, contact an authorized
Jacobsen Dealer.
2.
Inspect the
aerator on a daily basis. Establish a
maintenance schedule and keep detailed records.
a.
Keep the
aerator clean.
b.
Keep all moving parts properly adjusted and
lubricated.
c.
Replace worn or damaged parts before operating
the
aerator.
d.
Keep all fluids at their proper levels.
e.
Keep shields in place and all hardware securely
fastened.
f.
Keep tires properly inflated.
3.
Long hair, jewelry, or loose fitting clothing may get
tangled in moving parts.
4.
Use the illustrations in the Parts Catalog as reference
for the disassembly and assembly of components.
5.
Recycle or dispose of all hazardous materials
(batteries, fuel, lubricants, antifreeze, etc.) according to
federal, state, and local regulations.
7.2
ENGINE _________________________________________________________________
IMPORTANT:
A separate Engine Manual, prepared by
the engine manufacturer, is supplied with this unit
.
Read the Engine Manual carefully until you are familiar
with the operation and maintenance of the engine.
Proper attention to the engine manufacturer’s directions
will assure maximum service life of the engine. To order
a replacement Engine Manual contact the engine
manufacturer.
The proper break-in of a new engine can make a
considerable difference to the performance and life of the
engine.
Note:
The aerator is designed to operate most efficiently at
the preset governor setting. Do not change the engine
governor settings or overspeed the engine.
During the break-in period, Jacobsen recommends the
following:
1.
Operate modestly for the first 25 hours at reduced
engine speed.
2.
Avoid full throttle starts and rapid acceleration.
3.
Allow the engine to reach operating temperature before
operating at full load.
4.
Change the oil and filter after the first 5 hours of
operation.
5.
Refer to
Section 9.2
and the
Engine Manual
for
specific maintenance intervals.
WARNING
Before you clean, adjust, or repair the
aerator,
disengage all drives, lower aerator head to the ground,
stop engine, and disconnect spark plug wire to prevent
injuries.
Make sure the
aerator is parked on a solid and level
surface. Never work on an
aerator that is supported only
by a jack. Always use jack stands.
!
Содержание GreensAire 24 58234
Страница 36: ...36 3 11 5 9 8 7 10 6 5 1 Ref 1 2 2 4 GREENSAIRE 24 3 1 Aerator Enclosure Serial No All...
Страница 40: ...40 8 7 7 7 5 5 4 4 2 6 6 3 3 1 22 10 9 13 12 14 11 15 16 17 18 19 20 21 GREENSAIRE 24 5 1 Chassis Serial No All...
Страница 56: ...56 2 1 1 3 2 1 4 5 6 9 3 8 7 8 10 11 12 13 14 13 15 GREENSAIRE 24 13 1 Slide and Glide Assembly Serial No All...
Страница 58: ...58 1 2 3 4 5 10 12 6 11 11 8 9 7 13 13 14 GREENSAIRE 24 14 1 Turf Guard Assembly Serial No All...