Jacobsen GreensAire 24 58234, Техническое руководство

Страница: 15 / 70

OPERATION 5
15
5.5 STOPPING / PARKING ______________________________________________________
To stop:
Release OPC handle (E) to bring unit to a complete stop.
To park the aerator under normal conditions:
1. Release OPC handle (E) , raise the aerator head (D) .
Move Shift Control Lever (C) to H position, engage
OPC handle and move away from the area of
operation.
2. Select a flat and level area to park.
a. Release OPC handle (E) to bring unit to a com-
plete stop.
b. Lower aerator head (D) to the ground, reduce
throttle to slow, and allow engine to operate at no
load for several minutes.
3. Move engine switch to OFF position.
If an emergency arises and the unit must be parked in the
area of operation, follow the guidelines outlined by the
grounds superintendent. If the unit is parked on an
incline, chock or block the wheels.
5.6 TO DRIVE / TRANSPORT ____________________________________________________
Read and follow all safety notes contained in this manual
when driving or transporting aerator. Refer to
Section 5.3
for general operating instructions. When operating in
Reverse look behind you to ensure you have a clear path.
1. Release OPC handle (E) and raise aerator head (D) .
2. Set Throttle lever (B) to Slow.
3. Move Shift Control Lever (C) to H position and
engage OPC handle (D) to drive to and from the
area of operation.
4. Adjust Throttle lever (B) to desired transport speed.
5.7 TRAILERING ______________________________________________________________
If the aerator experiences problems and must be shut
down and removed from the work area, the aerator
should be loaded onto a trailer for transport.
Use care when loading and unloading aerator. Tines may
drag or catch on trailer ramp. To prevent push rods from
being bent, remove the two lowest positioned tines.
Fasten aerator to trailer to prevent rolling or shifting
during transport.
Long Distance Trailering / Transport. If the aerator is to
be trailered on the highway, before strapping to trailer,
inflate tires to:
Front - 22 psi (152 kPa).
Rear - 22 psi (152 kPa).
After unloading aerator, reduce tire pressure to normal
operating pressure.
See Section 5.8
CAUTION
When transporting, operate the aerator in such a
manner to allow you to see the path ahead and
quickly move away from the aerator should you
accidentally lose control.
!