Jacobsen ECLIPSE 360, Руководство по безопасности, эксплуатации и техническому обслуживанию

Страница: 107 / 148

B
LDU ERROR CODES
en-107 Safety, Operation, & Maintenance Manual
Lithium
Vehicle Speed Counter Error:
The vehicle speed counter value has
not been updated.
Zero Speed Error:
The received vehicle speed is
greater than zero when it should
have been zero.
Vehicle Slow Down Too Slow:
The vehicle is not decreasing speed
fast enough when the system has
been set to monitor vehicle speed.
Vehicle Speed Value Error:
The received vehicle speed value
was equal to the indicator value. This
indicates that there was an error in
the speed measurement in the
traction controller.
Speed Set Act Error:
The difference between the main
CPU steer (speed) and motor (act)
speed has exceeded the error limit.
Speed Steer Cross Error:
The difference between the main
CPU and supervision CPU steer
speed has exceeded the error limit.
Motor Speed Cross Error:
The difference between the main
CPU and supervision CPU motor
speed has exceeded the error limit.
Direction Error.
Traction fault: Shut mower off, then
restart. If fault returns, mower must be
towed back to maintenance shed.
Steering fault: Shut mower off. Check
steering proximity switches for debris
or obstruction. Restart mower. If fault
returns, mower must be towed back
to maintenance shed.
    
    
LDU Error Code Description
Caution
LED
Alarm
Sound -
ing
Engine
Stop
Traction
Stop
Mow Stop
On Off Yes No Yes No Yes No Yes No
STEERING
FAULT 6101
STEERING
FAULT 6102
STEERING
FAULT 6103
STEERING
FAULT 6104
STEERING
FAULT 6200
STEERING
FAULT 6201
STEERING
FAULT 6202
TRACTION
FAULT 6210
STEERING
FAULT 6210