Jacobsen 63300 Скачать руководство пользователя

Страница: 24 / 144

5 OPERATION

5.6

TRANSPORT WHEELS (OPTIONAL) __________________________________________

Transport wheels are an optional accessory available
through your Jacobsen Dealer. Traction wheels are
recommended when not using the Mower Caddy to move
the mower from green to green

1. Push and hold the kickstand against the ground then

pull the mower handle, by the lift point, back until the
mower rests on the stand

(S)

2. To remove wheels, press retaining clip

(T)

away

from hub and pull wheel off hub.

3. To install wheels, press retaining clip

(T)

, place

wheel on hub and turn the wheel backwards until
studs on back of wheel line up with holes in hub

(U)

Push wheel in and release clip.

4. Always disengage reel switch prior to transporting

the mower more than a few feet.

5. Push the mower forward off the kickstand, start the

unit and engage the O.P.C. bail.

6. When using a vehicle to transport the mower, apply

parking brake, turn power off and disconnect power
connector.

Figure 5E

5.7

GRASS CATCHER _________________________________________________________

1. When the basket is about two thirds (2/3) full of grass

clippings, move the mower off the green.

2. Stop on a flat surface, disengage O.P.C. bail,

engage parking brake and disconnect power
connector.

3. Remove and empty the grass clippings from the

mower.

WARNING

Always engage parking brake and disconnect power
connector before installing or removing the transport
wheels.

WARNING

To prevent serious injury, always disengage
O.P.C. bail and disconnect power connector
before emptying grass catcher.

Содержание 63300

















































































































































Результаты поиска

Содержание 63300

Отзывы:

Похожие инструкции для 63300

Бренды по названию

Популярные бренды

Jacobsen 63300, Техническое руководство

Результаты поиска

Содержание 63300

Отзывы:

Похожие инструкции для 63300

Бренды по названию

Популярные бренды