Jacobsen 62287, Руководство по обслуживанию

Страница: 54 / 60

3-20 4247530-Rev A
ENGINE
3
19. Place the engine on a suitable stand or workbench
that will support the full weight in a safe manner while
preventing damage to the engine.
NOTE
If the engine is being replaced, some components must
be removed and installed on the new engine. Refer to
“Parts and Maintenance Manual” for additional
information and illustrations.
Installation Notes
• Inspect engine isolation mounts and replace if
necessary.
• Install the engine by reversing the order of removal.
• If necessary, remove components from the engine
and install the components on the new engine.
• Use new gaskets when installing the exhaust
system.
• Use new cable ties to secure wire connectors and
wire harnesses.
• Apply dielectric grease (Jacobsen PN 365422) to any
wire connectors disconnected.
• Fill the radiator with clean water and ethylene glycol
based antifreeze mixed for the coldest ambient
temperature.
• Replace the engine oil filter and fill engine with oil.
• Purge air from the fuel system. (See “Purging the
Fuel System (Diesel)” on page 3-8.)
Engine Service (Diesel)
A separate engine manual, prepared by the engine
manufacturer, is supplied with this machine. Refer to the
engine manufacturer’s manual for all engine-related
service.
Proper attention to the engine manufacturer’s manual
directions will ensure maximum service life of the engine.
Repair—Models 62305 and 62306
(Gasoline)
Air Filter Assembly (Gasoline)
Removal and Installation
See Figure 3-37.
!
CAUTION
NOTE
The air filter cartridge on this engine is a dry type; never
apply oil to it.
1. Park the mower safely. (See “Park Mower Safely” on
page 1-6.)
2. Allow the engine to cool completely.
Figure 3-37
3. Disengage retaining clips (1) and remove cover (2).
4. Remove knob (3) and air filter retainer (4).
5. Remove air filter pre-cleaner (5) and air filter
cartridge (6).
Do not remove air filter with engine running.
2
4
TN2703
3
6
5
1
1