5
Caller ID
When receiving caller ID information the telephone can
recognize the format FSK & DTMF. This information will be
stored automatically. If you need to change the format, you
have to disconnect and re-power again.
The caller ID number will disappear within 30 seconds.
The displayed number is up to 16 digits.
If the format is FSK, the date and time will be auto updated.
DTMF mode does not support this feature.
Message Waiting Indicator (MWI)
It is compatible with high voltage neon/90V and Lucent
low voltage system. Other MWI signalling systems must be
confirmed by the factory and implemented in production.
The MWI will flash if there is a message. Pick up the handset
or press the speaker
, then press the MWI to retrieve the
message.
The MWI is also a ringing indicator, which will flash if there
is a call or a message.
Busy tone disconnect automatically
If the handset is not placed on the cradle after a phone call,
the telephone can automatically switch to on-hook mode
and the line will connect accordingly.
Data port
The data port can be used to connect computer, fax,
extension, etc.
Setting Date and Time
In on-hook mode: Press
11
MMDDHHmm
.
MM: month (01-12)
DD:
date (01-31)
HH:
hour (00-23)
mm:
minutes (00-59)
C.
MAINTENANCE
s
Do not expose this product to dust, strong sunlight,
humidity, high temperature, or mechanical shock.
s
Do not use corrosive or abrasive cleansers on this
product. Keep the unit dust free by wiping it with
a soft, dry cloth.
D.
TROUBLESHOOTING
1.
No dialing tone
s
Check the telephone network
s
Check the connection of handset cord and straight
line cord
2.
No ringing or no continuous ring
s
Check the telephone line
s
Check the quantity of parallel phone set
s
Check flash settings
3.
Noise during talk
s
Check the telephone line
s
Check the handset cord
E.
FCC APPROVAL
Complies with Part 68 of the FCC rules. On the bottom of this
telephone is a label that contains, among other information,
the FCC registration number and the ringer equivalence
number (REN) for this telephone. If requested, you must
provide this information to the Telephone Company.
F.
EC DECLARATION OF CONFORMITY
Hereby Bell Xpress A/S / Bittel declares that this equipment
(Telephone HT60, type JJ HT60) is in compliance with
the essential requirements and other relevant provisions
of Directive 1999/5/EC R&TTE.
G.
JACKS
Use RJ11C USOC standard modular jacks.
IMHT60_20062014.indd 5
20/06/14 10:13
