29
To switch between 12 and 24hr, press UP or DOWN and press the TIME SET
button to confirm. The next segment (hour) will start flashing.
. Press UP / DOWN until the correct time setting is obtained. Press and hold
the button for quick forward scrolling. Press TIME SET to confirm and to
continue to set the next segment (minutes).
4. Choose between D. M. Y. (day-month year) and M. D. Y. (month-day-year)
by pressing UP or DOWN and press the TIME SET button to confirm.
5. When all indicators are set: 12/24 hr format, hour, minute, month-day-year
/day-month-year, press TIME SET to confirm.
setting .the .alarm .time
1. Press the centre button CLOCK to
view the digit display.
2. Press the ALARM button for more
than two seconds. The alarm icon
and the first segment (hour) will
start flashing.
. Press UP / DOWN until the desired alarm time is displayed.
Press and hold the button for quick forward scrolling.
4. Press the ALARM button once to confirm the time set and the next
segment (minutes) will start flashing.
5. When both segments (hour/minutes) are set, the display will show the
desired alarm time for about two seconds and then return to normal time
and date.
NOTICE: Any alarm setting will automatically activate the alarm (alarm on).
6. If you want to see the alarm time, press the centre button CLOCK and press
the ALARM button for less than two seconds.
To .switch .the .alarm .function .on/off
1. Press the centre button CLOCK to view the digit display.
2. Press the ON/OFF button to activate the alarm function.
. Press the ON/OFF button again to deactivate the alarm function.
To .silence .the .alarm .(snOOZE)
1. Press the centre button CLOCK. The light will be turned on and the alarm
will be deactivated for eight minutes after which it will sound again.
To .stop .the .alarm
The alarm can be deactivated in two ways:
1. During the sound of the alarm, press the ON/OFF button to mute
the alarm and automatically activate the alarm again after 24 hours.
2. Press the ON/OFF button twice to deactivate the alarm completely.
Backlight
Press the centre button CLOCK to activate the LED backlight for five seconds.
TO .sET .up .THE .CLOCK .WiTH .A .sEnsOR .(optional)
If you have installed a sensor already, you only have to press the SEARCH
button (for more than two seconds) on the back of the clock. Please see
“
Finding .the .RF .(radio .frequency) .signal .on .the .main .unit”,
page 1.
