OCTOBER 3, 2017
jaclo
industries
| 129 Dermody Street Cranford, NJ 07016
p
908.653.4433 | 800.852.3906
f
908.653.1717 | 800.852.4133
JACLO.COM
| PG 1
INSTALLATION INSTRUCTIONS
Thermostatic Valves
Part #’s: J-TH34, J-TH12
Thermostatic Valves with Built in Diverter/Shut Off
Part #’s: J-TH34-686, J-TH34-688
Thermostatic Valve with Built in Volume Control
Part #’s: J-THVC12
Diverter Valves
Part #’s: J-20682, J-20686, J-20688
J-TH34 / J-TH12
J-THVC12
J-20682 / J-20686 / J-20688
J-TH34-686 / J-TH34-688
FOLLOW ALL APPLICABLE LOCAL PLUMBING CODES, PUBLIC HEALTH AND SAFETY CODES
This unit has no serviceable filter. See Valve Maintenance Section
**RETAIN THESE DIRECTIONS FOR TRIM INSTALLATION**
System Requirements
- This thermostatic valve is designed for use with pressurized hot and cold water supplies only and should not be used
with low-pressure storage heating systems.
- This valve was factory set to 100
°
F maximum at a pressure of 45 PSI. The actual temperature must be checked due to
water temperature and pressure deviations.
Pressure:
Recommended range 30 PSI - 70 PSI
1/2” Valve:
1/2” NPT inlets and outlets
3/4” Valve:
3/4” NPT inlets and outlets
Temperature:
Hot water inlet - 165°F Max. - 130°F Min.
Marked dial range - 70°F - 120°F
Safety stop - Adjustable
