Jackson TEMPSTAR HH S Скачать руководство пользователя

Страница: 5 / 76

REVISION HISTORY

Revision

Letter

Revision

Date

Made by

Applicable

ECN

Details

11-23-15

QOF-386

Replaced Plumbing Booster Inlet diagram, pg. 54.

1-8-16

N/A

Updated schematic on pg. 70.

1-11-16

QOF-386

N/A

Changed item 12 on pg. 39 to 05700-003-07-76.

Added 05700-004-23-78, 05700-004-23-79, and 05700-004-23-

80 to view (pg. 35) and parts list (pg. 36).

Corrected Typical Electrical Circuits for TempStar HH Ventless.

5-7-17

N/A

Removed views that showed pressure regulator in certain

locations. Added the pressure regulator as an option.

Added exploded view and parts list for Motor & Pump Assembly.

Changed name of delime switch throughout from NORMAL/

DELIME to AUTO/MANUAL.

Added instructions on rinse arm maintenance to the Maintenance

section.

Added dimensions for the corner table notch to the Table

Dimensions page.

Added a Plumbing Options page.

Added the dispenser connections decal for the 460 V machine.

Added instructional pictures where appropriate.

Added external device wiring instructions as an Addendum.

Added instructions for programming new exhaust fan timer.

Updated schematics.

Updated to new manual format.

Audited and corrected all P/Ns in the manual.

9-9-17

8541

8543

Added the TempStar HH-E and associated parts and assemblies.

Moved door switch from the Tub Assembly page to the Hood

Assembly page.

Added door switch bracket assembly to the Hood Assembly

page.

Updated schematics on pgs. 76 and 77.

10-16-18

8392

8480

8533

8536

8558

8567

8576

8599

Replaced the HH Ventless with HH-E-VER.

Replaced the HH NB with HH-E NB.

Changed steam pressure to 10-30 PSI on pg. 5.

Updated electrical requirements on pgs. 6-7.

Added links to exhaust fan timer instructions to pg. 9.

Added Chemical Connections section to pg. 10.

Added Motor Rotation section to pg. 11.

Added False Panel/Corner Install section to pg. 12.

Added new exhaust fan timer to pgs. 23 and 25.

Changed P/N for contactor, item #4 on pg. 24.

Updated pgs. 28-29 with new door and arm assembly.

Replaced thermostat and components with solid state thermostat

and components pgs. 30-34.

Added page for new rinse tank on pg. 36.

Updated P/Ns on pg. 37.

Added new phase conversion kit P/N to pg. 41.

Updated plumbing on pgs. 42-45.

Changed rinse arm bearing assembly on pgs. 50-51.

Changed rinse arm bearing kit P/N on pg. 51.

Updated pg. 52-53 with new view and parts list.

Added list of applicable kits to pg. 57.

Updated schematics.

Содержание TEMPSTAR HH S













































































Результаты поиска

Содержание TEMPSTAR HH S

Отзывы:

Похожие инструкции для TEMPSTAR HH S

Бренды по названию

Популярные бренды

Jackson TEMPSTAR HH S, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание TEMPSTAR HH S

Отзывы:

Похожие инструкции для TEMPSTAR HH S

Бренды по названию

Популярные бренды