manualshive.com logo in svg

Jackson CONSERVER 24LT, Техническое руководство

Поделиться
Скачать
Jackson CONSERVER 24LT Скачать руководство пользователя страница 13

CAM 6: Cam 6 is an adjustable cam and controls the sanitizer pump.

FUNCTION: The sanitizer pump cam works off the normally closed contacts of cam 6. This requires the switch to be held open by the
cam and allowed to drop into the notch to operate the pump.

SETTINGS: The left side of cam 6 must be set to drop in just past the starting point of the fill cam. The adjustment for sanitizer volume
must be made with the right side of the cam.

CAM 7: Cam 7 is an adjustable cam and controls the detergent pump.

FUNCTION: The detergent pump cam works off the normally closed contacts of cam 7. This requires the switch to be held open by the
cam and allowed to drop into the notch to operate the pump.

SETTINGS: The left side of cam 7 must be set to drop in just past the starting point of the wash cam. The adjustment for detergent vol-
ume must be made with the right side of the cam.

CAM 8: Cam 8 is an adjustable cam and controls the rinse aid pump.

FUNCTION: The rinse aid pump cam works off the normally closed contacts of cam 8. This requires the switch to be held open by the
cam and allowed to drop into the notch to operate the pump.

SETTINGS: The left side of cam 8 must be set to drop in just past the starting point of the fill cam. 

CONSERVER 24LTP CAM TIMER OPERATION INSTRUCTIONS (CONTINUED)

10

Содержание CONSERVER 24LT










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды