Jackson Labs Micro-JLT GNSS Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 83

Jackson Labs Micro-JLT GNSS Скачать руководство пользователя страница 34

Micro-JLT GNSS™ User Manual

28

© 2019 Jackson Labs Technologies, Inc.

3.3.36 GPS?

This query displays the configuration, position, speed, height and other relevant data of the GNSS
receiver in one convenient location.

3.4 GYRO SUBSYSTEM

This command is not supported in the Micro-JLT GNSS™.

3.4.1 GYRO:MODE <ON|OFF>

This command is not supported in the Micro-JLT GNSS™.

3.4.2 GYRO:TRACE <int> [0,255]

This command is not supported in the Micro-JLT GNSS™.

3.4.3 GYRO:CAL <float,float,float,float,float,float>

This command is not supported in the Micro-JLT GNSS™.

3.4.4 GYRO:CAL:COMPUTE

This command is not supported in the Micro-JLT GNSS™.

3.4.5 GYRO:SENS, GYRO:EFC, and GPS:CAL:RESET

This command is not supported in the Micro-JLT GNSS™.

3.4.6 GYRO:GLOAD?

This command is not supported in the Micro-JLT GNSS™.

3.5 PTIME Subsystem

The PTIME subsystem regroups all the commands related to the management of the time.The list of
the commands supported is the following:

PTIMe:DATE?
PTIMe:TIME?
PTIMe:TIME:STRing?
PTIMe:TINTerval?
PTIMe:OUTput <ON|OFF>
PTIMe:LEAPsecond?

«
...
32
33
34
35
36
...
»

Содержание Micro-JLT GNSS




















































































Отзывы:

Нет отзывов