8
Figure 9
Figure 10
GAS CONVERSION: (Optional Orifice not included)
1. Remove the Cook Grid, Control Heat Shield, and Burner.
2. Remove the original O
rifice, using a ¼” Socket Wrench, with an extension and 7mm socket (Fig. 9)
3. Lightly coat threads of the replacement Orifice* with Teflon Tape or Gas Fitting Dope.
4. Install the new Orifice into Side Burner (Fig. 10)
5. Propane;
Please ensure that the fuel source is regulated to 11” WC.
6. Natural Gas; Please ensure that the fuel source is regulated to 4
” WC.
*NOTE: Contact your dealer for conversion Orifices.
Parts Needed for an LP
Conversion
Parts Needed for a NG
Conversion
JH-003: Orifice size #63
JH-001: Orifice size #55
JF-
99: 4” WC NG regulator
TECH TIP
Do NOT over tighten orifice; threads
can easily be broken off!
