14. REAR WHEEL DRIVE CONTROL: Pushing the joystick provides movement in the direction
the handle is pushed. Pulling the handle provides movement in the direction the handle is
pulled.
This control must be used in conjunction with the joystick (13) or damage to tires
could occur.
15. REAR WHEELS HEIGHT CONTROL: Push the joystick forward to lower both rear
wheels. PULL handle to raise rear wheels.
16. WOODCHUCK/ WINKIE CONTROL : Push the joystick forward to move the
winkie/woodchuck down. Pull handle back to move winkie/woodchuck up (build stock
pile away from elevator). Winkie/woodchuck can be stopped in any position.
17. HOPPER FLAP CONTROL: Push the joysticks to lower flaps. Pull them to raise flaps.
18. FRONT WHEEL HEIGHT CONTROL: Pushing the handle lowers front wheel, pulling the
handle raises the front wheel.
19. HORIZONTAL BELT SPEED CONTROL: This control provides variable belt speeds (0
– 650 FPM). Turn to “0” to stop belt, turn to “10” for maximum speed.
20. FUEL GAUGE: The gauge is located on top of diesel tank.
21. HYDRAULIC OIL LEVEL GAUGE (Bullet Type): Level must be between gauges.
Bottom gauge must be full and the top one empty.
22. HOUR METER
7
