conMIG 300
Operating manual
Page 19
General information’s:
These operating instructions are intended to ensure safe and efficient work with this welding unit.
Prior to initial operation of the unit, read the instructions carefully.
The information contained in this manual should be made available to all operational staff. These in
structions should always be kept ready-to-hand, near the machine.
Electromagnetic compatibility EMC (IEC 60974-10):
WARNING: This class A welding unit is not provided for use in housing areas, where the electric
power supply comes from a public low voltage supply.
It may possible, that through wire fixed or radiate disturbances, it isn’t easy to guarantee electromag
netic compatibility in these areas.
INFORMATION: The user is responsible for the trouble, which the machine generates during the
operation. He must rate and consider possible electromagnetic problems in the neighbourhood.
Warranty:
INFORMATION: Improper repair or servicing, technical modifications of the product, unauthorized,
not strictly from JÄCKLE GmbH permitted modifications, as well as carelessness at the installation or
use, or the nonobservance of care in own affairs lead to the extinction of every warranty.
DECLARATION OF CONFORMITY
within the meaning of EC recommendation EMC 2004/108/EG
respectively of EC recommendation 2006/95/EG
Manufacturer:
Jäckle Schweiß- und Schneidtechnik GmbH
Riedweg 4+9
D – 88339 Bad Waldsee
Germany
We declare, that below mentioned current source corresponds to the safety
requirements of the recommendations.
Name of unit:
MIG / MAG Welding Unit
Type of unit:
conMIG 300
Relevant
EC recommendations:
EMC recommendation 2004/108/EG
Low-voltage recommendation 2006/95/EG
Applied
EN 60 974-10
harmonised standards:
EMC product standard
for arc welding equipment
Especially:
EN 60 974-1
Arc welding equipment / Welding power sources
Jäckle Schweiß- und Schneidtechnik GmbH
Reinhard Jäckle
