Jackery Explorer 3000 Pro, Руководство пользователя

Страница: 8 / 50

06
SOLAR ENERGY CHARGING
If one or two solar panels are connected, you can directly connect the DC8020 port of the solar
panel to theDC8020 port of Jackery Explorer 3000 Pro for charging. If three or four solar panels are
connected,
please refer to the method shown in the following figure to charge through the solar series connector
(Note: The solar series connector is not in standard configuration, so you need to purchase it
separately. Please refer to the detailed operation instructions of the solar series connector before
using it.)
CHARGING FROM THE WALL
Please use the AC cable included in the package.
Explorer 3000 Pro
AC Charger
Jackery SolarSaga 200 or 100 or 60 Solar Panel Connection Guide
GB
EPS: Emergency Power System. Once you have connected the mains and the AC input port of the
EPS via the AC charger cable, you can use the AC output port of the EPS to power your unit (at this
point the AC power comes from the mains, not the EPS battery). In the event of a sudden loss of
mains power, the EPS can automatically switch to battery mode within 20ms. Since this is a
non-professional UPS function, it does not support 0ms switching. Do not connect to equipment with
high uninterruptible power requirements such as data servers and workstations. Please test several
times to confirm compatibility before use and it is recommended to connect to only one device. Do
not use more than one unit at a time to avoid triggering the overload protection. Failure to follow
these instructions may result in equipment failure or loss of data for which we cannot be held
responsible.
This product supports the connection of Jackery App for intelligent control and operation. Users can
download the Jackery App through App Store or Android application markets. Please refer to the
User Manual for Jackery App for detailed connection instructions.
APP CONNECTION
CHARGING YOUR JACKERY EXPLORER 3000 Pro
Green energy first: We advocate to use the green energy first. This product supports two modes of
charging at the same time: solar charging and AC wall charging.
When AC wall charging and solar charging are turned on at the same time, the product will give
priority to solar charging and both methods will be used to charge the battery at the maximum
permissible power.
AC Input Reset Button: When the Reset Button pops up, you need to remove AC charge cable and
press the Reset Button to reset.