9.
In the next step, the poles need to be place
under tension. This is easier to do if the tent
is lifted slightly. The best way to do this is for
one person to get underneath the flysheet
and lift the apex.
10.
Meanwhile, the other people should slot the
pins at the ends of the poles into the
corresponding lugs in the webbing tapes at
the foot of the flysheet. NOTE: leave the
inner lugs free.
11.
Next, attach all the clips to the silver
extension poles.
Poles (black)
12.
The black poles are now slid into position
alongside the seam, starting from a webbing
tape into which a pole end has already been
slotted. The correct positioning is behind the
silver poles and above the attached clips. The
black poles cross over each other at the
second (unattached) clip.
4
