background image

3

IMPORTANT SAFEGUARDS

READ THESE SAFEGUARDS CAREFULLY BEFORE  

USING THIS PRODUCT!

When using electrical appliances, basic safety precautions should always be 
followed including the following:
•  Read all instructions.
•  NOT FOR USE BY CHILDREN! Keep out of the reach of children to avoid injury. 

This appliance is not a toy.

• Do not operate this or any appliance with a damaged AC cord or plug.
• Unplug from outlet when not in use.
•  Do not operate if appliance malfunctions, has been dropped or appears 

damaged in any manner. Never attempt home repairs. Only a qualified 
appliance technician should repair appliance before re-use.

•  Do not use any attachments or utensils that were not recommended or 

supplied by the manufacturer. The use of attachments not recommended or 
sold by the manufacturer may cause serious hazardous situations including 
fire, electric shock or personal injury.

•  To protect against risk of electrical shock or injury, never immerse power 

cord, plug, or main unit in water, or other liquids.

•  Do not let Power Cord hang over the edge of table, counter, or come in direct 

contact with hot surfaces such as stoves.

•  Make sure the Lid is attached properly and is securely locked before 

operating the Power Juicer. (See Assembly Step 5.)

•  Make sure the motor stops completely and the unit is unplugged from the 

electrical outlet before disassembling, assembling or cleaning.

•  Should juicer suddenly stop or develop excessive vibration or unusually loud 

noise, shut off and unplug unit immediately, wait for Blade to stop running, 
then disassemble, clean thoroughly and reassemble.

•  To avoid risk of personal injury keep hands and utensils out of the juicer and 

away from its sharp Blade during operation. Use the Pusher, not fingers or 
utensils, to insert the produce into the juicer.

• Never disengage the Locking Bar during operation.
• The juicer Blade is extremely sharp. Use extreme caution when handling.
•  Should food become lodged in the Chute, and moderate Pusher pressure 

will not dislodge it, turn the Power Switch off, allow the motor to stop 
completely, then unplug the AC cord, disassemble the juicer and remove the 
blocked food.

•  Avoid personal injury. Never assemble the unit without using all components 

in their proper sequence, making certain the Blade is properly seated and 
secured in the Filter and Receptacle.

Содержание ULTIMATE

























Отзывы: