10
11
In order to assure that your juicing experience will be a pleasant one,
we have included this “Step-by-Step Guide to Juicing”. Juicing is a quick and
satisfying way to get the vitamins, nutrients, and minerals from fresh fruits
and vegetables… a few minutes well spent for a lifetime of good
health benefits!
STEP-BY-STEP GUIDE TO JUICING
5 Simple Steps to Get Started
Before You Begin
While we manufacture and ship under the highest standards,
we recommend you clean your Power Juicer before first use.
Step 1
Remove all packing materials including those found inside the machine between
the Lid and the Blade.
NoTe: If you do not remove the paper Blade Protector from the inside of the
machine before starting the motor, you will hear a loud noise and possibly
cause the machine to temporarily shut down.
Step 2
Disassemble and wash before first use. Re-assemble making sure the Blade
is secure and Locking Bar is locked into place. The motor will not turn on if
machine is not assembled properly.
Note: See Assembly and Disassembly instructions on pages 6-10 in this
operating Manual.
Step 3
Lower the Juice Spout into the downward position.
Step 4
Plug the AC cord into a 120 v wall outlet and turn on machine. Let the
juicer
run for approximately 5–10 seconds
before produce is inserted into the chute.
This will balance the Blade. (During the manufacturing process, a few drops of
motor lubricant may have dripped into the motor housing causing a burn off
odor. This is normal and will dissipate with initial use.)
Step 5
Remove Pusher, insert produce then replace Pusher quickly. Do not force
produce down the Chute. Apply a gentle pressure, this will help the Pusher
process the produce.
IMPORTANT: If you apply too much pressure it can cause the motor to
strain and possibly shut down. See Built-In Thermal Cut Off Switch/
Automatic Shut Off on page 4.
