郁
. Maintenance period and maintenance items
Technical maintenance period
According to different law of technical state worsening degree of each part, classify the regular technical maintenance
into four classes.
1. Daily maintenance: after 8-10hs' working time
2. Class-one maintenance: after 100h working time or running for 4000-5000km.
3. Class-two maintenance: after 250h working time or running for 10000-12500km.
4. Class-three maintenance: after 1000h working time or running for 30000-40000km.
Technical maintenance items
In order to guarantee diesel engine operate normally, do technical maintenance as follows:
1. Daily maintenance
荫
Check oil level of diesel oil, cooling fluid and oil and fill up if necessary.
荫
Wipe off dust on the battery and splashed electrolyte to ensure air vent unblocked.
13
Note:
Check oil level after diesel engine dying.
Diesel oil specification: use light diesel oil according with GB252, NO.0 for summer, NO. -10 or -20 for winter
(warm area) and NO.-35 (cold area).
Note:
Filling up the fuel tank during operation is forbidden. Do not fill up oil tank when vehicle runs under hot tem
鄄
perature, otherwise oil will overflow because of inflation, once inflating, wipe it immediately.
5W/30
Not lower than CF-4
Oil mode
15W/40
Not lower than CF-4
HFC4DA1
HFC4DA1-2B
HFC4DA1-2B1
Not lower than CF
Quality class
Not lower than CF
HFC4DA1-1
Local temperature
-15
益耀
40
益
9-30
益耀
5
益
Gear position
Engine rotating speed
gear
玉
0-3200
gear
域
1400-1800
gear
芋
1400-3500
gear
郁
>1350
gear
吁
>1350
12
3. Keep rotating speed of engine I during breaking-in period in the following scope
4. Do not exceed the limiting loading.
芋
. Selecting oil
Select oil according with GB11122d based on season alternation and local temperature.
OWNER
爷
S MANUAL
2.8L Series Diesel Engine