JABSCO 50870 Series, Руководство пользователя

Страница: 2 / 24

Installation Instructions
● The Cyclone can be mounted on any flat surface.
●
The pump must be installed below the lowest fluid level to
maintain flooded suction.
● Fit pump in a dry, well ventilated position.
●
Use rubber grommets provided to minimise vibration.
● If mounted vertically, ensure the motor is above the pump head.
● Use 3/4" pipe fittings with PTFE pipe joint tape or compound.
●
Plastic fittings should not be used if pump is installed below
the waterline..
WARNING: Do not pump petrol or fluids
with a flash point below 37°C (98°F).
Explosion and death may occur.
WARNING: All marine pumps discharging over-
board must be installed with the overboard
discharge well above both static and heeled
waterlines. Flooding and death may occur.
Cyclone
Pump
Stainless Steel DC
Motor/Pump Unit
Features & Benefits
●
Heavy duty robust design
●
Stainless steel construction
●
Long life DC motor
●
Silent running
●
Anti-clog impeller design
●
Long life mechanical seal
●
Single tool servicing
Specifications
● Recommended duty Max. 30 minutes duty (Min. 30 minutes off)
●
Motor life 2500 hours
● 2m suction lift when wet
Relevant Standards:
● ISO 8846 MARINE and USCG Regulations for Ignition Protection
●
ISO 8849 MARINE Bilge Pump Standard
Performance Curve
Typical performance based on pumps running at
12.8V and 25.6V DC
1.2 (17.4)
1.0 (14.7)
0.8 (11.6)
20 (5.3) 0
0
40 (10.6) 60 (15.9) 80 (21.1) 100 (26.4) 120
0.6 (8.7)
0.4 (5.8)
0.2 (2.9)
1.4 (20.3)
Flow – lpm (gpm)
Total Head – bar (psi)