Jabra Talk 35, Руководство пользователя

Страница: 9 / 15

8
ENGLISH
PAIRING IT WITH YOUR PHONE
Headsets are connected to phones using a procedure called
‘pairing’ . By following a few simple steps, a phone can be paired
with a headset in a matter of minutes .
As described in the section JABRA VOICE GUIDANCE above the
pairing process is supported by voice prompts .
1. Put the headset in pairing mode
- When you turn on your Jabra Talk 35 for the first time, the
headset will automatically start up in pairing mode – i .e . it is
discoverable for your phone . When the headset is in pairing
mode the LED is flashing blue .
2. Set your Bluetooth® phone to ‘discover’ the Jabra Talk 35
- Follow your phone’s instruction guide . First make sure that
Bluetooth® is activated on your mobile phone . Then set your
phone to discover the headset . This usually involves going
to a ‘setup,’ ‘connect’ or ‘Bluetooth®’ menu on your phone and
selecting the option to ‘discover’ or ‘add’ a Bluetooth® device .*
3. Your phone will find the Jabra Talk 35
- Your phone will find the headset under name “Jabra Talk 35” .
Your phone then asks if you want to pair with the headset .
Accept by pressing ‘Yes’ or ‘OK’ on the phone and confirm with
the passkey or PIN = 0000 (4 zeros) . Your phone will confirm
when pairing is complete .
In case of unsuccessful pairing, put the Jabra Talk 35 into pairing
mode manually . Make sure the headset is on . Press and hold the
answer/end button for approximately 5 seconds until the LED is
flashing blue .
* Phone dependent