As part of the installation, you can dial into your local Jabra setup server,
which will configure the audio path. Follow the instructions shown on the
display. If your Jabra setup server is unavailable, contact your local Jabra
Support team.
Additional phone settings:
In version 2.5.1.2000, the DHSG mode is deactivated by default. You need
to activate it using Aastra.cfg or mac.cfg using the command “dhsg:1”.
Set the Audio mode to Headset/Speaker:
Options>Default settings>Audio settings>Audio mode>Headset/Speaker
Note
:
There is no option for remote call control when using an expansion keypad.
29/06/2021 17:16
/supportpages/jabra-pro-9465/9465-29-804-102/faq/4b3cba38-ca36-4410-8a36-
3e1fbff5b658
Page 4 of 4
