Microphone level setup:
1. Please call someone with the headset.
2. On the headset, you must now press the PLUS and MINUS buttons
simultaneously. This will immediately produce a signal tone.
3. You can now increase the microphone volume with PLUS or decrease
the volume with MINUS.
4. To confirm, after 15 seconds a low signal tone sounds in the
background. The settings are then automatically saved.
Phone setup:
Important
: Once the headset has been connected and set, a reset must be
implemented with OptiPoint so that the EHS function is accepted.
An optional headset button can be set up via the phone menu
(combination: *91 >Select button > Change button > Headset > OK).
28/06/2021 15:40
https://www.jabra.no/supportpages/jabra-gn9120/9129-808-111/faq/700c04e5-ac46-
486c-9257-207952d17dec
Side 4 av 4
