background image

Cautionary Notes to Computer Users 

When using any headset with a computer, care should be taken in dry or low humidity environments
to protect the user from electrostatic discharge from the monitor (CRT). Computer monitors can
induce a substantial electrostatic charge when turned on or off, or when there is a power failure, and
the resulting electrostatic discharge can be passed through the headset to ground.

A user in close proximity to or touching the computer may feel a common “shock” sensation, similar
to touching a doorknob after walking across a carpet, causing no harm to the user. This discharge is
entirely due to the computer monitor; the headset is merely the shortest path to ground.

To minimize the possibility of electrostatic discharge through the headset, you can:

• Use a grounded screen in front of the monitor.

• Use static dissipative wrist straps.

• Increase the relative humidity in the room to 60% or more.

• Install static dissipative carpets or floor coverings (anti-static sprays can be helpful).

• Remove the headset before turning the computer on or off.

GN Netcom, Inc. headsets meet all OSHA, UL, FCC and CS standards.

Safety Instructions

• Never try to dismantle the product yourself. None of the internal components can be 

repaired by users.

• Do not expose the headset to rain or other liquids.

• The headset is equipped with a rechargeable NiMH battery (nickel-metal-hydride). For 

battery replacement, please  contact your distributor or reseller.

FCC Notice to Users

Upon request only, you must notify your telephone utility company (telco) of your intention to install or
permanently remove an FCC Part 68 registered device or system. Include the FCC Registration
Number and the Ringer Equivalence Number (REN) located on the amplifier label.

The telco has the right to make changes to their network, which may affect the operation of your
equipment, provided you are given adequate advance written notice to permit correct operation.

This device complies with part 15 of the FCC Rules and ICES-003 Operation is subject to the follow-

1 5

Registering a New Master Headset

A new master headset may be registered to the product in case of loss 

or damage to the original headset. To register a new master headset:

1) Unplug the power adapter for a couple of seconds.

2) Plug the power adapter back to the power outlet.

3) Secure the new master headset into the 

Base Unit

.

1 4

GN9120 BETA User Guide  11/20/02  5:12 PM  Page 14

Содержание GN 9120












Отзывы: