8
electronic Hook switch (eHs) solutions for Nortel
SEt uP INFOrmatION
To connect your Nortel phone and Jabra headset, just follow these simple steps:
Setting up the Nortel phone
In the “Preferences” menu, choose “Headsets…”
1.
Press the “Apply” button.
2.
In “Active Headset Device” select the appropriate headset type from a list of Wired, USB, or
3.
Bluetooth headsets.
Selection of a particular headset type fine tunes the audio to that particular headsets type.
Selecting the right headset type is therefore recommended to achieve best performance.
EHS functionality operates in PC/computer mode of Jabra GN9350e, not phone mode.
regional sales contacts:
Americas: Bill Orlansky, [email protected]
EMEA:
Norbert Lohwieser, [email protected]
APAC:
Mike Powrie, [email protected]
For more information visit www.jabra.com/nortel
see tHe Last Page for order iNfo
*UNIStim firmware release 3.1 for IP Phones is available for download from the “Software Download” link under “Support and
Training” on the Nortel website located at: http://support.nortel.com. The firmware is available by phone model under “Phones,
Clients and Accessories”. These firmware loads have not been introduced as the
default loads for the IP Phones shipped from Nortel, and must be installed by your system administrator.
SuPPOrtEd NOrtEl IP PhONES
Nortel iP phone 1120e
Nortel iP phone 1140e
Nortel iP phone 1150e
Jabra gN9350e
Jabra gN9330e Usb
or
Usb connection Phone to Headset
Usb – Usb cable
included with the headset
The Jabra GN9350e series were verified as compatible with Nortel phones: 1120E, 1140E and 1150E in a controlled laboratory
environment. Visit the Nortel website to view important legal notices about Compatible Products.
