EN
1
MMD510307
JABLOTRON Mercury
Thank you for purchasing a JABLOTRON Mercury system. This user manual will guide you and
explain everything you need to operate the system.
PEACE OF MIND AND SAFETY
If the alarm is to truly assure protection, it must be connected to an alarm receiving centre (ARC) to
ensure professional intervention in the event of danger. If you do not utilize an ARC service, please
contact your Installation Partner.
HOW TO ARM AND DISARM THE SYSTEM
Fire, fl ooding and tampering detection is permanent, intrusion detectors monitor only if the
system is armed.
The garage door and entrance gate may be controlled by the alarm system through the means of
additional output modules.
The doorbell function is available if the system has a doorbell button enrolled during confi guration.
Depending on your system setup, use:
REMOTE CONTROL
Subject to how the alarm system is confi gured, the remote control allows the user to arm and/or
disarm the entire alarm system or its sections.
KEYPAD WITHOUT A DISPLAY
Depending on how the alarm system was confi gured during installation, the keypad arms or
disarms the entire alarm system or its part.
AUTHORIZATION
: You must always enter your valid access code or use an RFID tag/card on the
keypad before using the ARM or DISARM buttons. The validity of the authorization is indicated by
the green fl ashing of the indication light bar.
ALARM CANCELLATION
:
press DISARM
HIGH-QUALITY
ALARM
PROFESSIONAL
INSTALLATION
MONITORING
24H A DAY
ACTION IN CASE
OF AN ALARM
OPEN
THE GARAGE
OPEN
THE GATE
M CANCELLATION
:
press D
Red
– arm
Green
– disarm
Yellow
– out of range
Red
– arm
Green
– disarm
Yellow
– out of range
DISARM
DISARM
ARM
ARM
