Jabbla Tellus 5, Руководство пользователя

Страница: 33 / 46

Tellus 5
12 Enabling a mobile phone
The Tellus 5 can be supplied with an optional data module with SIM card for sending text messages. To send text messages, the mobile phone function must be
enabled.
1.
Right-click Tellus5 in the system tray and select Options from the shortcut menu.
2. Select the Mobile phone option.
3.
Click OK .
See also
Putting the device into flight mode on page 30
Enabling wireless Internet on page 30
Enabling Bluetooth on page 30
13 Automatically disabling the USB ports in sleep mode
To prevent peripherals also using a lot of power in sleep mode, you can automatically disable the USB ports when the device goes, or is switched, to sleep mode.
The USB ports at the back and the USB port at the bottom can be disabled separately.
NOTE
It is recommended not to automatically disable the USB ports in sleep mode! Only if you notice that the peripherals use up a lot of power in sleep mode,
you might want to consider automatically disabling the USB ports in sleep mode.
1.
Right-click Tellus5 in the system tray and select Options from the shortcut menu.
2.
As required, select the following options:
▪ Disable USB ports (back) during Standby
▪ Disable USB port (bottom) during Standby
3.
Click OK .
See also
Putting the Tellus 5 in sleep mode on page 24
Waking the Tellus 5 from sleep mode on page 25
Disabling sleep mode on page 31
14 Disabling sleep mode
It is recommended to disable sleep mode by using eye control, as the device can not be woken from sleep without some physical action (pressing the button,
tapping the screen).
1.
Click on Start and then choose Control Panel > Power Options .
2. Choose on the left Change when the computer sleeps .
3. From the Put the computer to sleep: drop-down list, choose Never .
See also
Putting the Tellus 5 in sleep mode on page 24
Waking the Tellus 5 from sleep mode on page 25
Automatically disabling the USB ports in sleep mode on page 31
15 Testing the switches
You can carry out a test to check whether the switches have been connected correctly and are working properly.
1.
Right-click Tellus5 in the system tray and select Options from the shortcut menu.
2. Press switch 1.
If operating correctly, the light in the left circle will be green.
3. Press switch 2.
If operating correctly, the light in the right circle will be green.
4. Click OK .
See also
Starting up the device using a switch on page 29
Setting up the switches on page 30
F Settings
13 Automatically disabling the USB ports in sleep mode
31